United Electric Controls UE VANGUARD WirelessHART TCD60HXY, Инструкция по установке и обслуживанию

Страница: 28 / 44

WirelessHART Toxic & Combustible Gas Detector
IM_TCD60-01
www.ueonline.com/vanguard
25
3.3 Programming Mode
This section describes the HART Commands used in the device.
3.3.1 Universal Commands
The Universal Commands are the minimum command set for all HART devices and provide access to infor-
mation useful in normal device operation. Table 2 shows the supported Universal Commands for this device.
0 Read Unique Identifier
1 Read Primary Variable
2 Read Loop Current and Percent Range
3 Read Dynamic Variables and Loop Current
6 Write Polling Address
7 Read Loop Configuration
8 Read Dynamic Variable Classifications
9 Read Device Variables with Status
11 Read Unique Identifier Associated with Tag
12 Read Message
13 Read Tag, Descriptor, Date
Table 2
3.3.2 Common Practice Commands
The Common Practice Commands are an optional command set for HART devices. Table 3 shows the sup-
ported Common Practice Commands for this device.
33 Read Device Variables
34 Read Primary Variable Damping Value
35 Write Primary Variable Range Values
42 Perform Device Reset
44 Write Primary Variable Units
47 Write Primary Variable Transfer Function
50 Read Dynamic Variable Assignment
51 Write Dynamic Variable Assignments
54 Read Device Variable Assignments
59 Write Number of Response Preambles
78 Read Aggregated Commands
79 Write Device Variables
Table 3
14 Read Primary Variable Transducer Information
15 Read Device Information
16 Read Final Assembly Number
17 Write Tag, Descriptor, Date
18 Write Tag, Descriptor, Date
19 Write Final Assembly Number
20 Read Long Tag
21 Read Unique Identifier Associated with Long Tag
22 Write Long Tag
38 Reset Configuration Changed Flag
48 Read Additional Device Status
90 Read Real-Time Clock
103 Write Burst Period
104 Write Burst Trigger
105 Read Burst Mode Configuration
106 Flush Delayed Response Buffers
107 Write Burst Device Variables
108 Write Burst Mode Command Number
109 Burst Mode Control
115 Read Event Notification Bit Mask
116 Write Event Notification Bit Mark
117 Write Event Notification Timing
118 Event Notification Control
119 Acknowledge Event Notification