18
PA966/967 User's Manual
Now the laser will scan every three seconds. Aim the laser at the
target bar codes and each read bar code will appear on your PA966’s
screen (
Data Only
mode shown to the right).
Auto-Scan
In the same menu select
Start Auto-Scan
.
In the pop-up menu (shown to the right) select the time interval you want
between scans. Example shown is 3 seconds. Click
Start
.
Show Data Only
Select his function if you simply want the scanned data to appear on
the screen, one scan after another.
Select
Show Data Only
.
1D Scanning
The PA966 can be equipped with either a 1D laser bar code scanner
or a 2D imager. Following are the procedures for 1D scanning. For
2D scanning, refer to page
22
.
Select the
Test
tab near the top of the screen. Tap
Menu
at the
bottom of the screen and a list of options will appear.
