Chapter 1
Getting Started
9
Charging the Battery with the Docking Station
1. Plug the AC adapter cable into the power jack on the docking station, then con-
nect the AC adapter into an electrical outlet.
2. Slide the device into the docking station until it clicks
into place.
3. The connection is secure when the bottom edge of the
device is aligned with the docking station, and the LED
indicator on the device lights up red.
Checking the Battery Status
If the battery level becomes low in the course of normal use, a status icon appears on the
device screen indicating low or very low battery status. In both cases, perform an Active-
Sync operation to back up your data, then recharge your device as soon as possible.
If the battery level reaches low status, the device will enter sleep mode; if the battery
level reaches very low status, the device will enter deep sleep mode. In this case, you
have about 72 hours to recharge your device after which you risk losing all data on
your device’s internal memory.
LED Status
LED
Meaning
PA600
Solid Red
Charging
Solid Green
Charging complete
Docking
Station
Power LED
Power is on
Charging LED:
Charging
Sync LED
Synchronization is taking place
Содержание PA600BT
Страница 1: ...unitech PA600 Rugged Enterprise PDA User s Manual 400546G Rev A ...
Страница 6: ...iv ...