Aztec Inverse
This parameter sets the Aztec inverse decoder setting. Options are:
Regular Only
- the decoder decodes regular Aztec barcodes only.
Inverse Only
- the decoder decodes inverse Aztec barcodes only.
Inverse Autodetect
- the decoder decodes both regular and inverse Aztec
barcodes.
Redundancy Level
The decoder offers four levels of decode redundancy. Select higher redundancy
levels for decreasing levels of barcode quality. As redundancy levels increase, the
decoder’s aggressiveness decreases.
Select the redundancy level appropriate for the barcode quality.
Redundancy Level 1
The following code types must be successfully read twice before being decoded:
Code Type
Code Length
Codabar
8 characters or less
MSI
4 characters or less
D 2 of 5
8 characters or less
I 2 of 5
8 characters or less
Redundancy Level 2
The following code types must be successfully read twice before being decoded:
Code Type
Code Length
All All
64
Copyright 2013 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
Содержание MS842PG
Страница 2: ......