Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
28
Battery and Safety Information
The printer is powered by a 7.4V Li-Ion 2200mAh battery pack.
• Charging time in the printer is approximately three hours.
• Take the battery out of the printer during long periods of storage.
• The battery storage temperature is 40°F to 104°F (4°C to 40°C). Do not store a
fully charged battery at temperatures greater than 104°F (40°C) for long periods
of time – the battery may permanently lose charge capacity.
• The recommended temperature for charging is between 68°F (20°C) to 77°F (25°C).
• Be sure to use a fully charged battery before long or battery intensive
printing sessions. Certain operations (e.g., printing receipts with a lot of
bar codes and graphics) drain the battery more quickly than others.
• Dispose according to your local regulations.
Do not throw in trash.
Caution! Do not disassemble, short circuit, heat above 80°C or
incinerate, because the battery may explode.
Recycling Batteries
The Rechargeable Battery Recycling Corporation (RBRC) is a non-profit organization
created to promote recycling of rechargeable batteries. For more information about
how to recycle batteries in your area, please visit www.rbrc.org.
