Unitech MP350 Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 35

Unitech MP350 Скачать руководство пользователя страница 16

Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

16

Connecting the Printer

• The MP350 supports Serial RS232 and IrDA compatible infrared

communication interfaces. Radio frequency (RF) Bluetooth communication is also

available as an optional feature.

• Serial, IrDA and Bluetooth communication settings can be changed via a

DIP Switch located on the control card.
• Printer drivers for Windows 95/98/NT/2000/XP are available from

Unitech.

• PrinterCE print control utility for Windows CE devices is available from Unitech.
• Printboy Print Utility from Bachmann Software or PalmPrint Utility from

StevensCreek are recommended for mobile computer devices.

Dip Switch Location

• The DIP Switch is located inside the battery compartment, which is shown below.

Access to the Dip Switch is located inside the battery compartment.

•

Open the

battery door, and remove the Li-Ion battery.

• The functions assigned to these switches are on page 17.

• If the serial interface is selected, the communication parameters; baud rate, data

bit and parity must be set.

NOTE:

Ensure the battery is properly seated before closing the battery door.

NOTE:

An optional serial cable is available for serial RS232 communication.

Dip Switch Location

«
...
14
15
16
17
18
...
»

Содержание MP350




































Отзывы:

Нет отзывов