manualshive.com logo in svg
background image

Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

28

Copyright 2008 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.

29

Action Taken

Command String

Command String Characters

Enter Flash Font Download Mode 

and Pick Font to Download/Modify

<ESC> <’D’><’A’><n>

n - Bank  to be modified { 0..7}

Load a Flash nt character

<ESC><’D’><n1><n2><data>

<n1> Reserved for compatibility 

{0x30,0x31,0x32,0x33,0xFF}

<n2>  Character Code {0x21..0xFF}

{CHR$(33)..CHR$(255)}

<data> 16x23 bit (WxH) character 

matrix (46 bytes total) Each 

Character must also fit into  t he 

matrix specified by the font size.

Tell the printer that you are Done 

loading characters.

<ESC><’D’><0xFF>

                                      

Table A.0 – Flash Based Font Download Commands

The table below shows the memory map and the way the fonts are located within the 

MP200 memory. As you may notice there are many banks. The difference between 

the MP200 and the MP300 is that there are no tables in the banks and that is why it is 

not necessary that the user specifies table number while downloading Fonts. The user 

can enter any number for the table but the number would not make a difference – it 

is used only for compatibility with the other models. The ASCII and extended tables 

are located right one after another in each bank. The bank numbering starts from 

location 8000 with bank 0 and goes vertically. Thus for example Courier Font 1 & 2  

International is in bank 0, Courier 3 International  is in Bank 1, Courier 1 & 2 Line Draw 

is in Bank 4 ( notice that the empty banks do not count)., etc.

                 

      A.1.2 Flash Font Print Commands

     

The table below describes the commands needed to print with a certain font. Please 

note that character ‘-‘ is not part of the string. The default Printer setting is Courier 

International 21CPI (decimal code 27 107 4).

Font Type Command 

String

Font Name

Font Print Command

File Name of File to 

restore Factory Font

International

(Esc – F1)

Courier International 

12 CPI & 16 CPI

Esc-k-1 Prints 12 CPI

Esc–k-2 Prints 16 CPI

EX-GRP-12.DWN

Courier International 

19 CPI

Esc – k – 3

Prints 19 CPI

EX-GRP-10.DWN

Courier International   

21 CPI & 24 CPI

Esc-k-4 Prints 21 CPI

Esc-k-5 Prints 24 CPI

EX-GRP-08.DWN

Rotated Courier

Esc-k-0

International

Graphic

(Esc –F2)

Courier Graphic 12 

CPI & 16 CPI

Esc-k-1 Prints 12 CPI

Esc-k–2 Prints 16 CPI

EX-INT-12.DWN

Courier Graphic 

19 CPI

Esc–k–3Prints 19 CPI

EX-INT-10.DWN

Courier Graphic 21 

CPI & 24 CPI

Esc–k–4 Prints21 CPI

Esc–k–5 Prints24 CPI

EX-INT-08.DWN

Rotated Courier 

Graphic

Esc-k-0

 

Table A.1 – Flash Font Print Commands

Содержание MP200



























Отзывы: