1
PLUG-IN OR DIRECT WIRE FLUORESCENT LIGHT
LUMIÈRE FLUORESCENTE CONVERTIBLE JOINTIVE
(Page 5)
LUZ FLUORESCENTE ENLAZABLE CONVERTIBLE
(Página 11)
ITEM/ARTICLE/ARTÍCULO
#0283501, 0283506,
0283511
MODEL/MODÉLE/MODELO #GU9712L-T5-WHI,
GU9724L-T5-WHI, GU9733L-T5-WHI
PREPARATION
Before beginning installation of product, make sure all parts are present.
Compare parts with package contents list and diagram above. If any part is
missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
Flathead Screwdriver Safety Glasses
Electrical Tape Pliers
Philips Screwdriver
Wire Cutters
Wire Strippers
Estimated Assembly Time: 45 minutes
Tools Required for Assembly
PACKAGE CONTENTS
Part Description Quantity
Hardware Kit
*Actual hardware may
differ from illustration.
F
G
I
H
Fixture
Bulb
Connector Cord
Power Cord
Diffuser
Screws
Wall Anchors
Wire Nuts
Wire Coupling
A
B
C
D
E
F
G
H
I
1
1
1
1
1
2
2
3
1
A
C
E
D
B
PREPARATION
DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you presently
have dimmer controls, you will need to remove them and replace them with
regular electrical switches. If you have a three way dimmer, you will have to
replace it with a regular three way switch. If you are unfamiliar with electrical
installations, we recommend you have a qualified electrician do your installation.
Important Safety Instructions
This unit has a polarized plug (one blade is wider than the other) as a safety
feature. This plug will fit in a polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Never use with an extension cord unless plug can be fully inserted.
WARNINGS AND CAUTIONS
WARNING
• Shut off power at the circuit breaker or fuse panel before removing the
old fixture.
CAUTION
• DO NOT USE THIS FIXTURE WITH A DIMMING CIRCUIT. If you presently
have dimmer controls, you will need to remove them, and replace them with
regular electrical switches. If you have a three way dimmer, you will have to
replace it with a regular three way switch. If you are unfamiliar with electrical
installations, we recommend you have a qualified electrician do your installation.
Power-Out Plug
Power-In
Receptacle
Power-In Plug
Power-Out
Receptacle