Unit UBS-2220, Инструкция по эксплуатации

Страница: 8 / 24

8
SCALES | UBS-2220
ENGLISH
OPERATING THE APPLIANCE
MEASURENT OF BODY FAT, MUSCLE AND BONE MASS PERCENTAGE
1. Turn on the scales. The LCD-display will light and data from the memory will
be displayed. By pressing the «SET» button you can step-by-step set the
required parameters for obtain the result:
a) Press the button ( ) to select the memory location where you
want to store you parameters or which you are already using. Press «SET»
again for conirmation of choosing parameter. The next parameter of in-
stallation will be displayed (Gender).
b)
Press the button ( ) to select your gender. Press «SET» again
for conirmation of choosing parameter. The next parameter of installation
will be displayed (Height).
c)
Press the button ( ) to select your height. Press «SET» again for
conirmation of choosing parameter. The next parameter of installation
will be displayed (Age).
d)
Press the button ( ) to select your age. Press «SET» again for
conirmation of choosing parameter. The settings have been completed!
You can press the «SET» button a few more times to change parameters you put
down incorrectly (the cycle described above will b repeated again).
2. Stand on the working surface of the scales. You feet should be bare and
dry. Make sure your feel are located on a metal surface (each one on two
squares), make sure your feet do not touch each other (in order to avoid
short circuit).
If you step on the surface of the scales and the LSD-display automatically turned
off, press the «SET» button and wait until current settings will appear on the
display.
3. As soon as you step on the scales, the display will show the weight indicator
(irst time it will be increasing until it ixes on the exact value).
4. Within a few seconds, the scales will automatically determine the percent-
age of your body fat, hydration, muscle and bone mass and also daily cal-