TO START WEIGHING
1.
Weighing mode
Place the scale on a solid and flat surface.
Place bowl (if used) on the scale before turning on the scale.
Press “M/Z” to enter weighing mode.
Wait until LCD shows all information.
Load weighing object on to start weighing, LCD will show the weight reading.
If the weighing object is water or milk, press M/Z button to choose volume mode and view the volume of
weighing object.
2.
Volume indication mode
Place the scale on a solid and flat surface.
Press “M/Z” to turn on the scale.
Wait until LCD shows “0”, and press MODE button to choose “Water” or “Milk” mode.
Put a liquid container onto the scale platform.
Press M/Z button to reset LCD to “0”.
Pour liquid (water or milk) into the container, LCD shows the volume of the liquid.
Press M/Z button to choose “Weight” mode and view the weight of liquid.
“ZERO” OR “TARE” FUNCTION
To weigh different loads consecutively without removing loads from the scale. Put first Load on the scale, get
weight reading. Press M/Z button to the reset the LCD reading to “0” before adding next load. You can repeat
this operation.
Condition 1: “ZERO” function
When total sum of all load
s on scale≤4%
of scale’s max. weight capacity.
(4%=80 g when capacity is 2000g; 200g when capacity is 5000g)
LCD will show “---“ or “0g” each time M/Z is pressed. “---“ means not stable, please wait for a moment. “0g”
and meanwhile an icon “o” on lower left corner of LCD mean “M/Z” function is active. Max. weight capacity
remains unchanged.
Condition 2: “TARE” function
When total sum of all loads on scale>4% of scale’s max. weight capacity.
(4%=80 g when capacity is 2000g; 200g when capacity is 5000g)
LCD will show “---“ or “0g” each time M/Z is pressed. “---“ means not stable, please wait for a moment. “0g”
and meanwhile an icon “TARE” on upper left corner of LCD mean “TARE” function is active. Max. weight
capacity is reduced by total weight of all loads.
Under this condition:
By pressing M/Z, you can see the total weight of all loads on the scale. If you want to weigh more loads, just
press M/Z to reset LCD reading to “0” again.
AUTO SHUT OFF
Auto shut-off occurs if display shows ‘0’ or shows the same weight reading for 2 minutes.
