background image

Wake-up your e-Guard:

Installation guide:

150 mm

Make sure the door latch cannot be 
opened.

When the button is pressed, SLEEP 
appears on the display. 

To activate the device you have to 
press the button 5 times within 5 
seconds. 

After that the display shows StArt for 
a short time. Now the seal is ready 
and creates sealing numbers.

1/4”

ø6mm

1/4”

ø6mm

Cut excess with a saw and remove 
any sharp edges with a file.

Additional tools

Saw
drill ø6mm or 

1/4”

Open-end spanner 10
pen

file

5 SEK
5x

Push the button and write down the 
4 digit unique sealing number.

unlock your seal

Push the button on your final desti-
nation and check your code again.

Close  the seal

How to use:

8930

8930

Отзывы: