Page 4
655920
4. Remove the end cup holders on both sides of the vehicle to access the plastic
shroud.
5. Open the glove box and remove the 4 bolts retaining it in place. Remove the 4
wires at the power accessory outlet. Pay attention to how they come off, as they
need to go on the same way.
6. Remove the entire dash by pulling down and out. The driver’s side needs to come
out first and go in last.
7. After the dash is out of the vehicle, access the 8mm bolt that holds the steering
column shaft onto the steering column.
8. Remove the bolt and remove the stock steering shaft assembly.
