Unison Research
Unico CDPrimo
19
TRACK SELECTION
PLAY
Once the CD has been loaded successfully, simply
push the /
PLAY/STOP
button on the front panel or
the /
PLAY/PAUSE
button on the remote handset to
start the disc spinning and play the music. On the
display are shown the message
PLAY , the
current track number and the elapsed time.
NEXT TRACK
If you want to jump to the next track, push the
NEXT
button on the front panel: the message
NEXT
is displayed and the reproduction starts from the
beginning of the next track.
SCAN FWD
If you keep the same button pushed for one second,
the player scans the disc forward starting from the
current position while providing an audible signal to
make it easier to identify the position within the
track. The message
FF is displayed. When the
button is released, the music starts playing from the
reached position.
PREVIOUS TRACK
Correspondingly, when pushing the
PREVIOUS
button on the front panel, the message
PREV is
displayed and the reproduction starts from the
beginning of the current track. Pushing the
PREVIOUS
button again makes the player jump to the
beginning of the previous track.
SCAN REV
If you keep the same button pushed for one second,
the player scans the disc reverse starting from the
current position while providing an audible signal to
make it easier to identify the position within the
track. The message
RW is displayed. When the
button is released, the music starts playing from the
reached position.
The same functions are accessible from the remote handset: in this case to
select a track use the buttons identified by the symbols and , while to
scan the disc use the buttons and , keeping them pressed until the
desired position has been found.
Содержание Unico CD Primo
Страница 1: ...HIGH END ELECTRONICS BORN IN ITALY...
Страница 2: ...2...