Digital Video Network Surveillance System
Unisight Digital Technologies, Inc
41
the “Adjust” button on the right side of Brightness, Contrast, Saturation and Hue,
press [ENTER]key, you will enter the corresponding adjust interface. In the adjust
interface, there is one scroll bar at the bottom, you can use [
Ç
] [
È
] keys to adjust and
can find the video image will be changed at the same time. When you are satisfied
with the real time video image, press [ENTER] to return “Color” menu.
Step 4: You can copy the video parameters of current camera to any other
cameras. Or you can repeat setp2 and step3 to adjust for any other camera.
After adjusting, in “Image Setup” menu, press “Confirm” button to save parameters and
make them become effective. Otherwise, press “Cancel” button or [ESC] key to abort
modification.
5.7 Mask Area Setup
In some cases, maybe you want to mask the sensitive area. This area will not
be previewed and recorded. The mask area setup steps are following:
Step 1: Enter “Camera” menu:
Step 2: Select one camera: You can use [
Ç
] [
È
] keys to select one camera.
Step 3: Enter “Advanced settings” enable the check box beside “Privacy Mask”
item, you can press [Enter] or [edit] key to change the flag into “
9
”, and active
“Area” button. Move “Active Frame” to “Area” button on the right side of mask
check box, press[ENTER]key to enter mask area setup interface. Shown as Fig.5.14
below
Fig. 5.14 Mask area setup
Step 4: Setup mask area: In the mask area setup interface, there is one small
