CONGRATULATIONS WITH YOUR NEW MICROSENSOR MULTIMETER!
The Microsensor Multimeter is a powerful and versatile four-channel microsensor amplifier which can
be used with all Unisense sensors and electrodes.
O
verview
The Microsensor Multimeter is a digital microsensor amplifier with automatic sensor detection,
making the connection of the sensors ‘plug-and-play’. The user interface consists of a keypad and a
graphical OLED display, allowing the user to view signals, adjust signal gain and offset, etc. directly on
the instrument. The Microsensor Multimeter can be used as a stand-alone instrument or signals can
be transferred directly to a PC using a Unisense SensorTrace PC program.
S
uppOrt
,
Ordering
,
and
cOntact
infOrmatiOn
If you wish to order additional products or if you encounter any problems and need scientific/
technical assistance, please do not hesitate to contact our sales and support team. We will respond to
your inquiry within one working day.
E-mail: [email protected]
Unisense A/S
Tueager 1
DK-8200 Aarhus N, Denmark
Tel: +45 8944 9500
Fax: +45 8944 9549
Further documentation and support is available at www.unisense.com
i
nStallatiOn
and
Setup
O
perating
and
setup
cOnditiOns
The Microsensor Multimeter is a laboratory instrument.
Temperature
0°C to 50°C
Calibration
The Microsensor Multimeter is offset calibrated on the four channels as well as
the two analog channels
Power
Batteries, 8 x 1.5 V (AA) batteries
External voltage 9V (5-28V)
Mains supply 50/60Hz, 230/110V
One battery package at a time can be exchanged while operating the Micro-
sensor Multimeter.
If mains supply is disconnected battery supply will continue operation.
Note:
Ensure mains supply is grounded.
Hardware version, firmware version, and serial number are available from the About Tab in the
Microsensor Multimeter interface.
Select your preferred power supply, e.g. AC, by inserting the power cable into the mains supply and
making sure that the cable is plugged into the AC socket of the Microsensor Multimeter.
