OPERATING MANUAL FOR
1
|
DELIVERY
1.1
|
Packaging and Content Delivery
During transport the rear sliding doors, shelf brackets and shelves are removed. Everything is packed and placed on
exhibition board.
Inside the exhibition space you will find individually wrapped dismantled smaller portion of the case.
1.2
|
Transport to the installation site
It is recommended to transport showcase in the original packaging to the place of its installation.
During transport of the showcase and subsequently during its establishment in the site is prohibited exert a force (push) to
all glass showcases.
When receiving the unit from forwarder visually check that the display case was not damaged during transport. Unpack
also all individually packaged parts and check them. In case of any damage, contact the supplier immediately and do not
install the machine. Fill the report with the driver.
1.3
|
Storage
If you do not unpack the showcase after delivery immediately, it must be stor
1. Showcase should be kept in their original packaging in a dry and dark place.
2. Do not turn upside down nor to side the showcase. Do not place any objects on it.
3. Keep the showcase away from direct sunlight, frost an
to +30 ° C. Humidity of storage room must not exceed 60%.
1.4
|
Unpacking
1. Use the suitable tool, remove all individually packaged parts and remove all reinforcing elements and packaging
materials.
2. Visually check that the display case was not damaged during transport. Unpack also all individually packaged parts
and check them. In case of any damage, contact the supplier immediately and do not install the machine. Fill the
report with driver.
3. Remove the display case of the pallet. Due to the weight of unit we recommend to use of at least four persons for
removing it.
How to complete a showcase after unpacking can be found in section 3.2.
After unpacking ensure a proper disposal and
showcase user's country. If you are unsure, entrust the disposal to a specialized company.
PERATING MANUAL FOR
ADDA SMALL HOT
Packaging and Content Delivery
During transport the rear sliding doors, shelf brackets and shelves are removed. Everything is packed and placed on
you will find individually wrapped dismantled smaller portion of the case.
Transport to the installation site
It is recommended to transport showcase in the original packaging to the place of its installation.
showcase and subsequently during its establishment in the site is prohibited exert a force (push) to
When receiving the unit from forwarder visually check that the display case was not damaged during transport. Unpack
individually packaged parts and check them. In case of any damage, contact the supplier immediately and do not
install the machine. Fill the report with the driver.
If you do not unpack the showcase after delivery immediately, it must be stored under the following conditions:
Showcase should be kept in their original packaging in a dry and dark place.
Do not turn upside down nor to side the showcase. Do not place any objects on it.
Keep the showcase away from direct sunlight, frost and moisture. The optimum storage temperature is b5
to +30 ° C. Humidity of storage room must not exceed 60%.
Use the suitable tool, remove all individually packaged parts and remove all reinforcing elements and packaging
Visually check that the display case was not damaged during transport. Unpack also all individually packaged parts
and check them. In case of any damage, contact the supplier immediately and do not install the machine. Fill the
Remove the display case of the pallet. Due to the weight of unit we recommend to use of at least four persons for
How to complete a showcase after unpacking can be found in section 3.2.
After unpacking ensure a proper disposal and recycle all packaging materials. Dispose according to the relevant law valid in
showcase user's country. If you are unsure, entrust the disposal to a specialized company.
1
During transport the rear sliding doors, shelf brackets and shelves are removed. Everything is packed and placed on
you will find individually wrapped dismantled smaller portion of the case.
It is recommended to transport showcase in the original packaging to the place of its installation.
showcase and subsequently during its establishment in the site is prohibited exert a force (push) to
When receiving the unit from forwarder visually check that the display case was not damaged during transport. Unpack
individually packaged parts and check them. In case of any damage, contact the supplier immediately and do not
ed under the following conditions:
d moisture. The optimum storage temperature is b5
Use the suitable tool, remove all individually packaged parts and remove all reinforcing elements and packaging
Visually check that the display case was not damaged during transport. Unpack also all individually packaged parts
and check them. In case of any damage, contact the supplier immediately and do not install the machine. Fill the
Remove the display case of the pallet. Due to the weight of unit we recommend to use of at least four persons for
recycle all packaging materials. Dispose according to the relevant law valid in
