OPERATING MANUAL FOR
A
|
INSTALLATION INTO THE TABLE
A.1
|
GN2
Hole recommended dimensions: 750x665 mm
Front and rear inner edges
PERATING MANUAL FOR
ADDA SMALL HOT
INSTALLATION INTO THE TABLE
Hole recommended dimensions: 750x665 mm
Front and rear inner edges
How to remove front panel in 3 steps:
1)
Unscrew bolts below front panel
2)
Remove panel by pulling it down
3)
Now the unit is ready to be used as drop
1
2
3
12
remove front panel in 3 steps:
lts below front panel
Remove panel by pulling it down
Now the unit is ready to be used as drop-in