Page
3
RapidRac™
Installation
Manual
p
Step 1
Lay bay frames on roof where array will
be installed. Connect bay frames using
bolts, washers and fl ange nuts. Consult
RapidRac Code Compliance for proper
uses of WEEB 9.5
[4.] Assembly
Step 2
Attach 2 module brackets to each
module using hex bolts, washers and
fl ange nuts on all four connections
points, using WEEB 9.5 on frame
holes facing in towards the array.
Note:
Make sure to use a piece of
cardboard to protect the module
from the surface of the roof.
Bay Frames
Step 3
Lower module with module brackets
between rows of bay frames. Connect
using hex bolts and washers on all
six connections points. Pressed nuts
have been attached to the inside of
brackets to speed installation.
le brackets
es. Connect
rs on all
ssed nuts
nside of
on.
Module bracket
WEEB 9.5
