Unique UGP 6C CR, Руководство пользователя

Страница: 12 / 32

MAINTENANCE AND SERVICE
The user should be aware of service that must be done on a regular schedule to keep the refrigerator
operating properly. Installation must be by a licensed gas fitter in accordance with local codes or in the
absence of local national Fuel Gas Code, ANSI Z233.1 and in Canada B149.2 Propane Storage and Handling
Code (latest edition).
REFRIGERATOR REMOVAL and PERIODIC MAINTENANCE
Before working on the refrigerator, shut off the gas supply. Disconnect the gas supply line at the rear of the
refrigerator. Always use a back-up wrench when loosening and tightening this connection. Cap the gas supply
line and remove the refrigerator.
Replacement is the reverse of removal. Check all connections for gas leaks.
Refer to Installation
To keep your refrigerator operating effectively and safely, periodic inspection and cleaning of several
components is recommended once or twice a year, sometimes more often depending on the environment.
• It’s important to keep the area at the back of the refrigerator clean. Clean the coils on the back of the
refrigerator. Use a soft bristled brush to dust off the coils.
Note: The following maintenance is required at least once or twice a year.
• Check all connectors in the complete refrigerator LP gas system for gas leaks.
• The LP gas supply must be turned on. Apply a non-corrosive bubble solution to all LP connections. The
appearance of bubbles indicates a leak and should be repaired immediately by a qualified serviceman.
WARNING – DO NOT USE FLAME TO CHECK FOR GAS LEAKS
Clear blue
flame colour
Check burner flame for proper appearance. The flame should be light blue
with no yellow at the tip. See Fig. #6
Burner Jet/Orifice
Burner holder
Burner Mounting Screw Electrode Thermocouple Burner Tube
Fig. #6
Fig. #7
12