GPS
RECEIVER
From within your mapping, or navigation software (including the supplied GPS Information utility), you
will need to manually configure the selection of the COM port to what was assigned to the GPS
receiver so that proper communication between the GPS receiver and mapping program can occur.
Most all software requires that you manually configure the COM port setting for any GPS device you
use.
IMPORTANT:
1.
You must change the default rate setting of your mapping software ‘s Baud Rate to 9600 if this is not currently set
as such otherwise GPS data cannot be received.
2.
Set Baud Rate
9600,
Data Bit
: 8,
Parity
: None,
Stop Bit
: 1,
Flow Control
: None
PAGE 4 OF 14
