User Manual
August 2011
©Unique Perspectives
www.click2go.ie
Page 26 of 35
For fast switch users it is important to keep the switch acceptance time short as it
may appear to them that pressing the switch has no effect and they may
presume the unit or switch to be broken.
To set the Switch Acceptance Time
1. Select program mode and then press
Button 6
.
2. The current Switch Acceptance Time is indicated by whichever button is
blinking according to the table below:
50 milli-seconds (short)
Button 1
¼ second
Button 2
½ second (long)
Button 3
3. Select the desired Switch Acceptance Time by pressing the corresponding
button.
4. You can now leave program mode by pressing the
button.
5. Confirm that the new Switch Acceptance time has the desired effect.
Note:
If you have set the switch acceptance time to long remember that you must press the
switch for that length of time before anything happens. Short presses of the switch will not have
any effect and may be confused between a broken switch or a malfunctioning unit.
Furthermore, if you are using Short Click Scanning it is recommended to set the Switch
Acceptance time to short.