4
2010-07-23
COPYRIGHT 2010, UNIQUE AUTOMATION
Graphics Display
When the bath is empty or BUI is not used for few minutes BUI goes into
hibernation and its graphics display goes blank. To make the system ready for use
you need to touch any function or navigation button and the graphics below will
appear indicating bathomatic status: Current bath water temperature and depth and
the last called / desired water temperature and depth.
bathomatic status:
Filling - when bathomatic is filling
Paused - bathomatic filling/draining is paused
1
Draining / emptying - when bathomatic is draining
Empty
Current Water Temperature
- displays the temperature of the water in the bath
Current Water Depth
- displays the depth of the water in the bath
Desired Water Temperature
- displays the temperature value last sent to
bathomatic
Desired Water Depth
- displays the depth value last sent to bathomatic
1
Pressing the
button during filling or draining will put bathomatic in paused status awaiting further
instructions. Pressing the
button again will change status to filling and
followed by the
button will change status to draining.
bathomatic status
Current Water Temperature
Desired Water Temperature
Current Water Depth
Desired Water Depth
