5
2010-07-23
COPYRIGHT 2010, UNIQUE AUTOMATION
Quick Start
Touch the BUI if the graphics display is blank. The graphics display will light up
showing the current depth and temperature of water in the bath in the larger font
and in the small font on the lower right below temperature and depth the last used
desired values for temperature and depth. Should you whish to run the same
values again, just press
To increase/decrease the desired water temperature use
/
and to
increase/decrease the desired water depth use
/
. Pressing the
will start
filling to the new values.
The desired values for water temperature and depth can be altered when
bathomatic is empty and is not filling or draining. Should you wish to change the
desired temperature and depth when bathomatic is filling or draining press
which
will pause bathomatic, then change the values and press again for bathomatic to
resume filling to the new settings.
When the desired water temperature and depth are being changed their reading on
the graphics display move from the small to the big font type in the place of the
current values.
Presets
bathomatic stores 9 presets with individual temperature, depth and perfume
selection.
Running a preset
From the preset menu using the / buttons select the presets you wish to run
followed by the confirmation button .
bathomatic runs Preset One
Presets
Preset One
Preset Nine
bathomatic runs Preset Nine
