Unipulse UPM100, Руководство по эксплуатации

Страница: 35 / 89

26
4 UTM Ⅱ Capacity Setting
26
Chapter
4
(7) Absolute value mode
It is possible to set the torque value and driving force value to absolute value.
<<Setting value>>
OFF: With sign
ON:
Absolute value
◇
How to set the absolute value mode
1.
Select UTM Ⅱ capacity setting mode.
2.
Set the "(1) UTM
Ⅱ
capacity setting target selection".
* Performed only when two UTM
Ⅱ
are connected.
3.
Perform "(2) Zero calibration".
4.
Perform procedure "(3) UTM
Ⅱ
capacity setting".
5.
Set the "(4) Rated output value setting".
* This setting can be configured only when "----" is selected in "(3) UTM Ⅱ capacity
setting".
6.
Set the "(5) Rated capacity value setting".
* This setting can be configured only when "----" is selected in "(3) UTM Ⅱ capacity
setting".
7.
Set the "(6) Pulse rate".
* This setting can be configured only when "----" is selected in "(3) UTM Ⅱ capacity
setting".
8.
Set the "Absolute value mode".
Press the keys and select
absolute value mode (initial value: OFF).
Press the key to confirm and move
on to the minimum input rotation speed.
* Press the key to cancel the setting and return to indicated value display.
(8) Minimum input rotation speed
The displayable minimum input rotation speed can be selected.
<<Setting value>>
Pulse rate Minimum input rotation speed (frequency)
When 4 pulses 0:15 rpm 1:10 rpm 2:5 rpm 3:3 rpm 4:2 rpm
When 1 pulse 0:60 rpm 1:40 rpm 2:20 rpm 3:12 rpm 4:8 rpm
Maximum
detection time
1 sec 1.5 sec 3 sec 5 sec 7.5 sec
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
%
PF
V
A
°C
rpm
V
°C
Nm
1
3 2
Σ
1
3 2
Σ
1
3 2
Σ
1
AUX
2 Σ
ALARM
REC
FNC
USB RMS
MEAN
△ ▽
ENT
ESC