Unipulse UPM100, Руководство по эксплуатации

Страница: 34 / 89

25
4 UTM Ⅱ Capacity Setting
25
Chapter
4
Press the key at the least significant digit to move to the most significant digit.
Press the key at the most significant digit to move to the least significant digit (initial
value: 1.0000Nm).
Pressing the key will reverse the sign.
Press the key to confirm and move on to pulse rate.
* Press the key to cancel the setting and return to indicated value display.
(6) Pulse rate
* This setting can be configured only when "----" is selected in "(3) UTM Ⅱ capacity setting".
Select the pulse input rate. Set the number of pulses per rotation.
<<Setting value>>
1-PUL, 4-PUL
◇
How to set the pulse rate
1.
Select UTM Ⅱ capacity setting mode.
2.
Set the "(1) UTM
Ⅱ
capacity setting target selection".
* Performed only when two UTM
Ⅱ
are connected.
3.
Perform "(2) Zero calibration".
4.
Select "----" in "(3) UTM
Ⅱ
capacity setting".
5.
Set the "(4) Rated output value setting".
6.
Set the "(5) Rated capacity value setting".
7.
Set the "Pulse rate" of the rotation
speed.
Press the keys and select the
pulse rate (initial value: 4-PUL).
Press the key to confirm and move
on to the absolute value mode.
* Press the key to cancel the setting and return to indicated value display.
▽
▽
☆
/
－
ENT
ESC
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
rpm
PF
Nm
V
A VA
var
W
%
PF
V
A
°C
rpm
V
°C
Nm
1
3 2
Σ
1
3 2
Σ
1
3 2
Σ
1
AUX
2 Σ
ALARM
REC FNC
USB RMS
MEAN
△ ▽
ENT
ESC