Unipulse F130, Руководство по эксплуатации

Страница: 4 / 36

III
CAUTION
●
Do not install in the following environments.
- Where the temperature/humidity exceeds the range of the specifications.
- Where the temperature changes severely or there is a danger of freezing or condensation.
- Places exposed to direct sunlight.
- Outdoors, or where the altitude exceeds 2000m.
- Dusty places
- Places containing large quantities of salt or iron powder.
- Where the main body is directly affected by vibrations or shocks.
●
Take adequate shielding measures when using at the following locations.
- Near a power line.
- Where a strong electric field or magnetic field is formed.
- Where static electricity, relay noise or the like is generated.
●
Install the F130 as far away as possible from devices that generate high frequency, high
voltage, large current, surge, etc. Also, carry out wiring separately from their power lines. Do
not carry out parallel wiring and common wiring.
●
For sensors and external outputs use shielded cables.
●
For turning on/off the power, be sure to keep intervals of 5 seconds or more.
●
After power-on, be sure to warm up the F130 for 30 minutes or more before use.
●
If the F130 is not used by the specified method, its protective performance may be impaired.
●
Do not use it, broken down.
●
Maintenance
- When performing maintenance, disconnect the power.
- Do not wipe with a wet rag, or with benzine, thinner, alcohol, etc. Doing so may cause
discoloration or deformation of the F130. In the case of heavy contamination, wipe off
the contamination with a cloth after dipping it into a diluted neutral detergent and wringing
it well, and then wipe with a soft, dry cloth.
●
When the F130 is shipped, spacers made of corrugated cardboard are used as cushioning
materials.
Though it is factory-designed so that shocks can sufficiently be absorbed, breakage may
result if shocks are applied when the spacers are reused for transportation. If you send the
F130 to us for repair, etc., take adequate measures against shocks by using polyurethane
materials, etc., separately.
●
If you dispose of the product, handle it as industrial waste.
This sign forewarns the presence of hazards
that could result in personnel injury or property damage
when incorrectly handled.
Caution on installation
Caution on wiring
Caution during startup and maintenance
Caution during transportation
Caution during disposal