Unipulse DS252, Руководство по эксплуатации

Страница: 55 / 124

3 Basic operation of the DS252
44
20 : Batch Total ON/OFF
Set whether or not to record batch totals.
21 : (Unassigned)
Setting name
20 : Batch Total ON/OFF (BATCH TOTAL)
Selectable items
00 : OFF (invalid) (initial value)
01 : ON (valid)
Display
Reference ・
To record batch totals, use the [Bch WRITE] terminal on the rear panel. Batch
totals are recorded by short-circuiting the [WRITE] terminal and [COM] terminal.
・
Several weighing counts are collectively recorded as one batch.
For more details, see "3-3-4.Batch total" (page25).
Precautions ・
The [Bch WRITE] terminal on the rear panel, which is used for batch total control,
cannot be used for recording on a CF card.
・
To perform GT operation at Batch-Total-ON time, be sure to record the batch total
just before the GT operation.
(As the grand total data by GT operation, the sum of batch totals is recorded on
the GT CH-A (B) line and the sum of individual data codes is recorded on the GT
TOTAL line. (See page 95.)
Completed batch totals are summed up independently. Since the data of
individual codes is summed up regardless of completion of batch totals, if GT
operation is performed without a batch total, the sum of batch totals and the sum
of individual codes will not match.)
2 0 : B A T C H T O T A L
0 0 : O F F