Unipro UniTire, Руководство пользователя

Страница: 13 / 28

13
Operating modes
R e f e r e n c e
G u i d e
PRESSURE MODE
This is the basic mode for a tire pressure
gauge. It simply shows the current tire pressure
and continuous updates it. To start in pressure
mode, turn UniTire on by pressing the
right
button ( ).
Pressure mode works in both digital and ana-
log mode. Please see ”GAUGE MODE SETUP”
on page 18.
Digital mode
Because UniTire is digital, more features are
available compared to an analog pressure
gauge.
The history list is a list of pressure values you
want to remember for later use. Each time a
new pressure value is put in the history list, the
oldest one drop off the list. The newest value
is at the top (also indicated by the small arrow)
and they moves down.
To put the current pressure value in the history
list, simply press the
right button ( ).
If you want to clear the history, press and hold
down the left button (
3
) until the history list
disappears. The history list can show up to four
pressure values.
The history list will be preserved, even when
UniTire is turned off.
Analog mode
Because of the graphical display, it is possible
to emulate a classic analog gauge. The scale
is going from 0 to the maximum value set in
”MAX RANGE SETUP” on page 19. Depen-
ding on the maximum range, a number of lines
divides the scale to make it fast and easy to
see the current pressure. For precise readout,
the current pressure is shown as a real number
in the display.
Another feature is the user selectable unit used
for the pressure. In the setup, it is possible to
select between several commonly units used
for pressure. Please see ”PRESSURE UNIT
SETUP” on page 20.
The current unit is shown in the square
brackets show in the bottom line in the display.