Unipro UniTire, Руководство пользователя

Страница: 20 / 28

20
R e f e r e n c e
G u i d e
Setup mode
lANGUAGE SETUP
UniTire is able to support a lot of different
languages and you are able to select them
from the setup menu.
To do that, move to SET lANGUAGE and then
select the desired language with the left
button ( ).
As soon you press the
right button ( ),
UniTire will be change to use the other lan -
guage. The name of the language is always the
same three letters. That way you can always
recognize your own language! If you get lost in
the languages, you can press the
right button
a little longer (
1
) to select English language.
CONTRAST SETUP
The contrast of the display is the light diffe-
rence between the dots that are turned on and
dots that are turned off.
you can manually adjust the contrast setting
by selecting “SET CONTRAST” and then press
the left button ( ) to adjust the setting. you
can change between –5 and +5. you will see
the contrast change at the same time. When
the contrast is what you like, press the right
button ( ) again to store the new contrast and
move to the next setup screen.
PRESSURE UNIT SETUP
UniTire supports the most commonly used
pressure units.
you select the unit from the “SET UNIT” screen
by pressing the
left button ( ). When the desi-
red unit is shown in the selection field, press
the right button ( ) to store it and move to
the next setup screen.
AUTO OFF TIME SETUP
UniTire will automatically turns off after some
time when not used.
you select the turn off time from the “SET OFF
TIME” screen by pressing the
left button ( ).
When the desired time is shown in the selec -
tion field, press the right button ( ) to store it
and move to the next setup screen.