Unipro UniStop, Руководство пользователя

Страница: 5 / 19

Quick Guide to the basic functions
This chapter describes how to get started with using the UniStop just for the basic functions:
taking lap times and split times for up to 4 drivers at the same time.
TURNING UNISTOP ON
Press the MENU button to turn the stop watch on. UniStop starts by showing the startup
screen for a few seconds. After that you will be on the stop watch screen. Press MENU twice if
you want to skip the startup sequence and go directly to the stop watch.
TAKING LAP TIMES AND SPLIT TIMES
You start each of the four stop watches by pressing L1, L2, L3 or L4. L1 means Lap for driver 1
and so on. It does not matter in what sequence the watches are started. You are free to use
them as you wish.
Each time you press the L1 you will save a lap time for driver number 1 – and the same for the
other buttons / drivers.
If you want to take split times, just press the S1 to S4 buttons. You can save up to 8 split
times per lap plus the extra split time you get automatically from the last split to the finish
line.
When you are finished with the race / training session, you can press the MENU button to show
the popup menu. Here you can choose STOP ALL to stop all watches and go to the main menu.
If you want a bigger font when using 3 or 4 drivers, just press and hold L2 when turning
UniStop on. Press and hold L1 during power-up to get back to the default mode again.
ANALYSE MODE
From the main menu, you can go to the Analyse screen. From this screen you can analyse the
times you have just measured. The screen is almost the same as before, but now you can
scroll through the different laps and splits. UniStop automatically selects the best lap for each
driver. If you press the L1 to L4 button, you can scroll up through the laps for each driver and
if you press S1 to S4 you can scroll up through the split times for each driver. If you however
want to scroll down, you simply press and hold the OK button while scrolling with the L1 to L4
and S1 to S4 buttons.
CLEARING LAPS
If you want to clear the laps stored you can do it in several ways.
- Press and hold OK while turning UniStop on.
- Choose “CLEAR LAPS” from the popup menu.
- Press and hold down OK for 1 second from the stop watch screen
You always have to confirm by pressing OK except when using the first method.
TURNING UNISTOP OFF
Pressing the MENU button and holding it down will turn UniStop off. You can do the same from
the main menu by choosing “POWER OFF”.
That’s how easy it is – if you are ready for some more advanced features, then read the
Reference Manual section.
UNIPRO – The original Laptimer
5