Stop watch popup menu
While operating the stop watch, you can bring up a popup
menu. Simply press the MENU button and you will see the
menu shown on the picture. Please notice, that if the stop
watch is started you will need to press a little longer on the
MENU button. This is to prevent you bringing up the menu if
you wanted to press the L4 button instead. This little delay is
only valid when one of the stop watched are running!
If you press the MENU button again, the popup menu will
disappear again. Otherwise use the up and down buttons (L4
and S4) to select the menu point you want and press OK.
From the popup menu you will be able to do the following.
•
Stop all watches running and go to the “Main menu”
•
Get more information, e.g. theoretical lap time and more
•
Remove a driver
•
Go to the “Main menu”
The default selected line menu point is always “Stop all”. That way you can quickly stop the
stop watch and go to the main menu by pressing MENU followed by OK.
If you want to go directly from the stop watch to analyse mode, you press MENU followed by
two clicks on OK. This will bring up the menu, stop all watches and enter analyse mode.
If however no watches are running you might see this popup
instead.
Because there are already some laps measure in the memory,
you will be able to do the following.
•
Clear all memory
•
Analyse the laps in memory
•
Go to the “Main menu”
If you already cleared the memory, the only thing you can
chose from the popup menu is to go directly to the main menu.
This example is shown on the picture on the left.
UNIPRO – The original Laptimer
12
Содержание UniStop
Страница 6: ...UNIPRO The original Laptimer 6...
