Unipro UniStop, Руководство пользователя

Страница: 17 / 19

LANGUAGE SETUP
UniStop is able to support a lot of different languages and you
are able to select them from the setup menu. To do that, move
to LANGUAGE and press OK. You will then be able to change
the language with the up and down buttons.
As soon you press the OK button again, UniStop will be change
to use the other language. The name of the language is always
the same two letters. That way you can always recognize your
own language!
AUTO POWER-DOWN SETUP
UniStop will automatically turn itself off if it is not used. To s
batteries, you want it to turn off as fast as possible, but on the
other hand it should not affect the daily work. ave
You can adjust the auto power-off time between 1 and 30
minutes by selecting “OFF TIME:” and press OK. Then use the
up and down buttons to adjust the setting. When the time is
what you want, press OK again to go back to the setup menu.
MULTISTART SETUP
UniStop can start the stop watches in two ways.
When Multistart is off, you start each stop watch one at a time.
When Multistart is on, you will always start all four stop
watches at once. If you want less drivers, you can always use
the “REMOVE DRIVER” from the popup menu to remove one.
LED FEEDBACK SETUP
UniStop will compare the lap and split times to the best and w
show if it is the same, better or worse with the three bright
LEDs at the top. ill
If you do not want this, you can uncheck the checkbox to turn
this function off.
UNIPRO – The original Laptimer
17