Unipro UniGo One, Руководство пользователя, Страница: 29 / 60

29
Setup mode
C o n f i g u r i n g
t h e L a p t i m e r
KART SETUP
The kart menu contains all the settings related
to the kart.
WHEEL CIRCUMFERENCE
The wheel circumference is entered in either
millimeters or inches and you need to measure
this quite often to keep the system accurate.
The best is to use a soft tape measure and do
it every time you go out from the pit. It will
have influence on the speed and the tire wear
counters.
Remember to measure the wheel where
the speed sensor is mounted!
When running without a wheel sensor, the
Laptimer is using the GPS information for
speed and distance instead.
TIRE WEAR
The tire wear menu contains all the settings
related to the tire wear counters.
Tire wear menu with counter no. 2 active.
Use the up ( ) and down ( ) buttons to
move around in the menu and press the ok
button ( ) on the relevant line to change the
value. To accept the changes press the
ok
button ( ) again or press back ( ) to cancel
the changes and revert to the original value.
USE COUNTER NUMBER
UniGo have five independent tire wear
counters. Each counter can keep track of the
distance each set of tires has driven. Only one
of the wire wear counters are used at a time.
COUNTER no. MENU
The counter number 1 - 5 menu contains each
of the tire wear counters. Here you can see
the counter, adjust it and reset it. There is one
counter menu for each tire wear counter.
Screen showing menu for tire wear counter
number 2.
The line with the tire wear counter is used to
see the counter value and manually adjust it.
If you forget to change the tire wear counter
number when changing the tires, you can add
the distance to the correct counter manually.
RESET COUNTER
If the tires are changed you can reset the tire
wear counter here. Change the value to Yes
and press the
ok button ( ). When you press
the ok button ( ) it will automatically change
back to No again. This is normal, and used as
an indication of the action taken.
KART NAME / TYPE
It is possible to enter a text describing the kart
or its type. Please enter the text as described
under ”ENTERING TEXT” on page 37.
WHEEL MAGNETS
The standard wheel sensor disc for karting
includes 6 magnets per revolution. But if you
use UniGo on other racing machines, you
might use less magnets per revolution. An
example could be a motorbike with only one
magnet mounted on the wheel. The number of
magnets can be adjusted from 1 to 6.