45
Kind 2 (124-131)
Item
Description
Default
Instruction
124 Ringing tone source of transfer 4
0: Refer to program K8 item 31
1: Refer to program K8 item 34
2: Refer to program K8 item 26
3: Refer to program K2 item 111-114
4: CO call/ Doorphone transfer: refer to program
K2 item 109
5: Refer to program K2 item 109
Application: When the user needs to distinguish
the CO or intercom incoming call.
ISDK-26 Plus: refer to K3 Item29,30
125
Display Caller ID & trunk line no. during
transfer
0
0: No
1: Yes
Application: While connect to DISA or voice
mail, it enable to display the trunk line and
caller-ID number on display type phone ringing
station.
126 ARS group
99
00/99: Invalid
01-09 groups
Application: Connecting different CO line to
different telecom service company or cellular
phone service, it can be programmed to route
the cheapest line.
Related programs: K2 item 133, K3 item 22-25,
94, 97
127
Whether to keep the DSS key for the
disconnected station port
0
0: No
1: Yes (The user will see the disconnected station
line on the DSS key)
For digital key phone ports only.
128 Ring tone type of incoming call
0
0: By Ring
1: By voice calls directly (for Uniphone key
phone only)
Application: For baby call/listening, 2-ways
handsfree communication event. It enable to talk
directly if adopting handsfree keyphone and K2
item 20 set as “1”; The receiver’s end will not
hear the busy tone if K2 item 120 set as “1”.
129 On-line recording on caller
0
0: No
1: Yes
Remark: Voice Mail card is needed.
Related program: kind 2 item 130
130 On-line recording on receiver
0
0: No
1: Yes
Remark: Voice Mail card is needed.
Related program: K2 item 129
131 Send DTMF tone when re-dialling
1
0: No
1: Yes
Notice: Please must to set as “0” for single line
telephone (analog normal phone).
