6
PEAK HOLD MODE OPERATION
START
Setting target torque
Current
max. value
(Peak Hold)
((...((...
...))...)) ((...((... ...))...))
((...((...
...))...)) ((...((... ...))...))
NOTE:
1. If
appears, that means this wrench has been
applied with more than 110% of torque of the spec.
2. When 90% of the target torque is reached, the green
LED will begin to flash and the alarm tone will beep
intermittently.
3. When 99.5% of the target torque has been reached, the
alarm will change to a steady tone and the green LED will
stop flashing and stay on. The red LED will also illuminate.
MAINTENANCE AND STORAGE
ATTENTION:
One-year periodic recalibration is necessary to maintain
accuracy.
Please contact your local dealer for calibration.
Apply torque
Flashing
Released
Apply
torque
Reach 90% of target torque
C
Buzzer
Green LED
Reach 90% of target torque
Reach target torque
Buzzer
Red LED
Approached target torque
Содержание 266B Series
Страница 14: ...14 ...
Страница 15: ...15 ...
Страница 16: ...Unior d d Kovaška cesta 10 3214 Zreče Slovenia 386 3 757 81 00 bike unior com www unior bike com ...