Union Audio elara.4, Руководство пользователя

Страница: 12 / 19

12
Master Sec on Con nued
Split –
When the Split Cue is ac ve (bu on illuminated) the Cue
signal is routed only to the le headphone when a channel Cue is
On, while the main Mix is always routed to the right headphone.
Add Mix –
Sets the amount of the Main Mix signal heard in the
headphones when a Channel Cue is ac ve. This is very useful when
beatmatching .
X Fade Contour –
The Crossfader Contour sets the fade
curve of the crossfader from smooth for mixing, to a sharp cut for
scratching.
Crossfader –
The crossfader is used to fade between channels
assigned to either the X or Y side of the crossfader.
Use the channel toggle switches to assign each channel to either the
X or Y side of the crossfader, or OFF if the switch is in the centre
posi on.
Master Meters –
The Master Meters display Mix Buss level on
the le and right channels. The meter indica on is not affected by
the Main Mix level control.
When a Channel Cue is On the meters automa cally switch to
display the channel pre
- fader signal level. When Split Cue is
selected the Le Meter displays the Cue signal level while the Right
Meter displays the Mix Level.
For the lowest distor on and the best dynamic range, operate the
mixer with the meters reading between
– 3VU and +6VU. Avoid
opera ng the mixer with the meter Red Peaks LEDs on.
Power Switch –
Press to power ON the Mixer. The Bu on
illuminates to indicate when the unit is powered on.