23
After pressing the “Enter” button, then, it will show L1 in
parameter 1 to indicate inverter A and the parameter 2 becomes
different selections. You can choose “Add” or “Sub” to adjust
inverter A voltage.
At this time, please press “Enter” button again to confirm
selection, then, it will be able to set up calibrated voltage in
parameter 2. The setting voltage range is from 0V to 9.9V and the
default value is 0V.
16: Inverter B voltage adjustment
Interface
Setting
Parameter 2: “InV” indicates inverter B voltage adjustment.
After pressing the “Enter” button, then, it will show L2 in
parameter 1 to indicate inverter B and the parameter 2 becomes
different selections. You can choose “Add” or “Sub” to adjust
inverter B voltage.
At this time, please press “Enter” button again to confirm
selection, then, it will be able to set up calibrated voltage in
parameter 2. The setting voltage range is from 0V to 9.9V and the
default value is 0V.
