7: Options
56
TS_604_01 PowerWave PW3000/TP User Manual UK 5/1/18
AS400 Inputs
The switched inputs are configured as 3 segments:
AS400 Interface Card installation
The AS400 Interface Card should be installed and configured by the commissioning engineer.
7.6
UPS Monitoring and automated control software
7.6.1 The importance of UPS management
The utility supply is inevitably unreliable every now and then; and assuring continuous power to all the facilities connected
to it can be a difficult task. The situation is further complicated if worldwide systems are managed via a Local Area
Network (LAN) or Wide Area Network (WAN). However, by using the PowerWave PW3000/TP UPS system in conjunction
with purpose-designed network management tools, a systems administrator can take measures to back-up data and
prevent system errors or data loss even in the event of a relatively long utility supply outage. In the case of an abnormal
utility supply, suitable UPS management software will also enable a system administrator to monitor all concerned
networks from a central point and identify bottlenecks at an early stage.
Despite extensive system monitoring, serious damage can still occur if an administrator fails to intervene in a timely
manner, so it is important that the installed UPS software will react automatically in such a case and shut down the
supplied system in a safe and controlled manner.
Uninterruptible Power Supplies Ltd considers it important to have a complete solution for its UPS systems, and offers its
customers a number of remote control and monitoring tools to provide optimum protection.
SNMP monitoring/control software
Working in conjunction with the adapter card described above, Uninterruptible Power Supplies Ltd offer suitable
monitoring and control software with SNMP functionality for NetWare, OS/2 and all Windows NT systems on INTEL and
ALPHA network platforms.
Segment 6
Terminal 8-1
User Configurable
– Battery Mode Shutdown (Default)
– Any Mode Shutdown
– Emergency Power Off
– Remote ON/OFF
Segment 7
Terminal 14-1
Reserved for UPS ON Signal
(Switch On UPS)
Segment 8
Terminal 7-1
Reserved for UPS OFF Signal
(Switch OFF UPS)
1
2
3
4
5
6
7
8
GND
USER SW2
USER SW1
USER SW3
9
10
11
12
13
14
AS400 CARD
