8
Loading Banner Media (optional feature)
It is possible to feed banner media manually. However, it is recommend to purchase the optional banner
media tray for higher volume printing.
•
To open the banner media tray, turn the lock knob clockwise until its triangle mark stops at the unlock mark.
Be careful that your hand does not hit the banner paper guide tray when turning the knob.
•
If you cannot turn the knob, turn it while pushing the banner paper guide tray toward the machine.
•
Hold the handle in one hand while supporting the back of the bypass tray with the other hand, and then
open the bypass tray slowly.
•
Open the bypass tray until it is parallel to the floor. Raise the banner paper guide tray, and then insert it into
the bypass tray until it becomes stable.
•
Load the paper face down until you hear the beep.
•
Align the paper guides to the paper size. If the guides are not flush against the paper, images might be
skewed or paper misfeeds might occur.
•
Open the subtray, and then raise the minor banner paper guide tray. Set the leading edge of the paper
according to the paper size.
•
When using paper that has a horizontal width of 1,200 mm (47.3 inches), curl the paper so that its leading
edge touches the minor banner paper guide tray.
