22
Using the ProRIP Software (Summary)
Once your image is loaded, take note
of the preconfigured settings
relating to the media being used in
the printer.
The ‘Queue’ tab shows the size of
the media that will be used, where to
load the media into the printer and
the paper type setting
recommended.
Each media type will contain this
preconfigured data to make your
printing experience as easy as
possible. Overriding these settings
could yield undesirable results.
To alter the color settings, click
on ‘Color Adjust’ and adjust as
needed. ‘Coverage %’ represents
the amount of white/clear toner
overprint or underprint
(depending on which queue is
being used).
The ‘Vary hole size in areas of
transparency’ option allows for
rasterization of colors that fade
into nothing and to retain partial
transparency. It is suggested
that this option is left on, as it
will only apply itself where it’s
needed.
‘Choke’ dictates how much the
overprint white layer is pulled in
under the colors. The higher the
number, to more it’s pulled in (to
avoid a white outline around
your graphic).
