HANDLING THE LINEAR UNIT
The Linear units are carefully packed in a HARD WOODEN BOX for a safe transportation.
To take the Linear Unit out of the box, please consider the following handling instructions:
- Never lift the Linear Unit by the END BLOCKS - see PICTURE A
- Never grab by the TIMING BELT of the Linear Unit
- Never grab by the CARRIAGE
- Never grab by the PROTECTION STRIP
To take the Linear Unit out of the box, a suitable lifting tool is needed. Always lift and carry the Linear Unit by the
main profile.
The Linear Unit must be supported all the time during the handling until it is fixed - mounted on the place, where it is
meant to be. For correct handling please refer to page number 1.020.0
PICTURE A is showing, that handling with the Linear Unit in this position is wrong, because the profile, guides and
other components might get deflected or damaged.
PICTURE A
Carrying the Linear Unit
holding the END BLOCKS
isn’t allowed, it must be
carried holding the
PROFILE of the Linear Unit.
1.015.0
MTJ MRJ Series
MANUAL
The specifications in order to improve the products in this catalogue are subject to change without notice.
