Linear Units
Linear Units
Linear Units
Linear Units
Linear Units
Identification label and additional or replacement parts of the Linear Unit
1 -
ID number
2 -
Serial number
3 -
Type of Linear Unit (ordering code)
In the case of ordering additional or
replacement parts for the Linear Unit
all data from the identification label
must be given.
Fixing system
±0,1
The linear Unit must be mounted by
the aluminium profile with evenly
distributed clamping fixtures along
the entire length!
www.unimotion.eu
The modules are mounted by
using fixtures which are placed
in the slot on the side of the
profile.
A
[ mm ]
B
[ mm ]
MTJ
MRJ
40
65
50
78
64,4
93
80
110
93
130
108
150
40
52
66
ECO
1.035.0
MTJ MRJ Series
MANUAL
OVERVIEW
MOUNTING
The label must be fully visible(in particular details of the serial number) and must ensure compliance with all the
instructions contained on it. Damaged or illegible label must be replaced.
Fixing system - TAP/PIN Holes
Fixing the Linear Unit can also be done by the botom of profile using TAP / PIN holes, which can be made on request.
TAP / PIN holes can only be made based on the manufacturer’s drawing of the position and depth of
the TAP / PIN holes. For the drawings showing position and depth of TAP/PIN holes, please contact us.
Number of clamping fixtures:
Please refer to our catalogue UNIMOTION
Linear Units on page 7.000.0
The specifications in order to improve the products in this catalogue are subject to change without notice.
