Unimig RazorWeld MS500, Руководство по эксплуатации

Страница: 26 / 84

26
Item
4
5
6
7
8
9
10
11
12
Name
Circuit breaker
Emergency stop
Start button
Low oil pressure
ALARM
High Water
temperature ALARM
Over-speed ALARM
Battery charging
failure ALARM
Low Fuel level ALARM
Engine speed indicator
and hour meter
Functional and operation instruction
1. It is a 15 Amp circuit breaker to protect the engine control
system.
2. If the circuit current of engine control system is overloaded with
more than 15A for a certain time, it will shut off the circuit, and will
require cooling down for minutes,
3. Pressed manually to reset circuit breaker.
1. It is a lockable push button.
2. It is normaly closed.
3. If the “emergency stop” push button is pressed, the engine will
stop and the engine cannot be restarted until emergency stop is
reset.
4. If the device is pressed inadvertaly, before starting engine, it
must be released: turn the button right for 90 degree, and the
button will pop-out automatically.
5. emergency stop device is for “EMERGENCY”. DO not use the
emergency stop to shut off engine normally.
1.It is a push button switch.
2. it is only used to start the engine.
3. when the engine is running ,do not push the button or it will
cause damage to engine.
1. Oil-pressure warning lamp.
2. Red lamp
3. During engine running, if the oil-pressure is below 69kpa, the
engine will stop ,and the lamp lights up.
1. high water temperature warning lamp.
2. Red lamp
3. If the engine water temperature is too high, the lamp lights and
the engine will shut off.
1. Over-speed ALARM.
2. Red lamp.
3. If the engine speed is over 1750rpm, the lamp lights and the
engine will shut off.
1. Indicator of battery charging failure.
2. Red lamp
3. If the generator is not charging the battery ,and the voltage of
battery during the engine running is below 14v DC ,the lamp lights
and the engine will shut off.
1. Indicator of low fuel level alarm
2. Red lamp
3. If the fuel level of the tank is below 10MM, the fuel sensor will
generate a signal ,the lamp lights up and the engine will shut off.
This will avoid the difficulty of restarting the next time.
1. Gauge of the engine speed.
2. It has a lamp to help read the gauge at night.
3. If the engine speed is over 1750 rpm, it will generate a alarm
signal.
4. It indicate’s the hours of engine operation to help guide the
periodic maintenance.