16 pc. Mini Die Grinder Kit
3
Compressed Air Supply
•
We recommend the use of an oil-fog lubricator in the compressed air line. If oil-fog lubricators (attached) are
not used, three to five drops of pneumatic oil must be fed into the compressed-air supply of the device
before any time it is used. Subsequent lubrication is needed after three operating hours at the latest. More
frequently if the ambient air is dusty and the tool is being used constantly.
•
The service life is shortened if a maintenance unit with a condensate drainage is not used. The humidity in
the compressed air would lead to corrosion in the device.
Decommissioning
After use, it is absolutely necessary to disconnect the compressed air hose. Accidental activation can lead to
injuries
Technical Specifications
Model
LX-002
Air Requirements
115 L/min
Recommended operating
pressure
90 PSI
Rotation Speed
25,000 rpm
Air Connection
Standard 1/4" NPT
Material
Aluminium
Grips
3/6 mm
Intended Ambient
Temperature
10 - 50°C
Vibration
2.44 m/sec2
Sound Power Level when
Idle
80 dB (A)
