16 pc. Mini Die Grinder Kit
1
Intended Use
This axial grinder is a handy, compressed air-powered device for the DIY and automotive/truck areas. It is
suitable for the grinding and planning of solid surfaces.
Only use this machine according to its intended use
! Any use extending beyond this does not constitute
intended use. The user, not the manufacturer, is liable for resulting damages or injuries of any kind.
Our equipment is not intended for commercial or industrial use. If this device is used in the context of
commercial or industrial use, the warranty is void.
When using tools, some safety precautions must be observed to prevent injuries and damages.
Therefore, read through this operating manual/safety instructions carefully. Store them in a safe
place so that the information is available to you at all times. If you should hand the appliance on to
other people, please give these operating/safety instructions to them as well. We will not assume
any liabilities for accidents or damages which do arise due to failure to observe these safety
instructions.
Safety Instructions
•
Keep these operating instructions ready at hand. You can then read up on important information and
instructions, if necessary.
•
Never make use of a defective or non-functioning device. Contact an authorised service centre or have the
device inspected by a qualified skilled technician.
•
Disconnect the axial grinder from the compressor before you exchange the accessories or an attachment.
Disconnect the axial grinder when not using the compressor.
•
Always work with the necessary levels of care.
•
Do not apply unnecessary force under any circumstances.
•
While grinding, be careful of flying sparks. Glowing parts that are blown upward can easily ignite flammable
materials and liquids.
•
Always wear appropriate protective clothing when performing all works/projects with the axial grinder such
as protective gloves, work boots, protective goggles, dust masks, ear protectors, etc. Persons in the
immediate working environment should take the same protective measures.
•
Only use suitable grinding inserts.
•
Make sure that the air pressure’s connection is not set at too high a level. Take into account the possible
impact of anything in the vicinity. Make sure that the workplace is well-lit.
•
Always disconnect the device from the compressed air supply before any repair or servicing work.
•
Improper repairs can result in injuries.
•
Never exceed the permissible operating pressure. Excessive pressure can damage the device and can lead
to injuries.
•
Keep pneumatic tools away from children. This device can lead to injuries if it is not used as intended.
•
Only connect the device to the pneumatic air supply via a quick-action coupling so it can be quickly
disconnected in the event of danger.
