2 | Installation guide
2 | Installation guide
• Compatible with all Unilux residential HVAC
equipment
• 92mm x 92mm
• LCD display with 5 touch sensitive buttons
Displays
:
• Operating temperature: 32 ~ 122 °F / 0 ~ 50 °C
• Resolution: 1°F / 0.5°C
• Temperature: °F / °C
• Voltage supply: 24VAC
• Mode: Heat/Cool/Auto/Off
• Fan: Low/Med/High/Auto
• Terminal to connect remote water temperature
sensor
• Connection terminals: C, R, Y/A, G1, G2, G3, W,
DP, FZ, TH, GND
• 12-hour / 24-hour format clock display
• Permanent hold, Temporary hold/ Schedule
and vacation
• LCD Backlight
• Set point, program settings and date and time
settings are stored in memory even power down
• Temperature calibration: -5 °C ~ +5 °C
• Terminals: 2 mm2 cable
• Drain pan and Freezestat detection
• Surface mounting installation
Universal thermostat must be installed by a trained technician.
Failure to follow these instrutions carefully may result in product
damage
Caution: Electrical Hazard
Equipment and wiring can cause electrical
shock and equipment damage.
Disconnect power before starting installation
1. Remove the content from the box.
2. Detach the bottom housing from the
thermostat by pulling the two pieces apart.
Universal Thermostat Requirements
Mount the Thermostat
