EN
- 9 -
Replacement Method and Reset of Filter
Instructions for DIY filter
replacement
(The pictures are for reference only, and shall subject to the specific model.)
1. Confirm the filter to be replaced according to the service life information of the filer on the screen
CF
PPCF
Reverse osmosis
membrane filter
Instructions for DIY
filter replacement
2. Replacement method of PPCF or reverse osmosis filter
Lift water container
Remove filter
Install filter
PPCF
Reverse
osmosis
membrane
filter
element
Alignment
point
Reverse
osmosis
membrane
filter
element
PPCF
Open the water container cap
and lift the water container up.
Removal method of PPCF and reverse osmosis
membrane filter: Hold the middle and lower
part of the filter according to the instructions
above the filter label, pull out about 20° in the
direction indicated, and then rotate to the left to
remove the old filter.
Assembly method of PPCF and reverse osmosis
membrane filter: Hold the middle and upper part
of the filter according to the instructions above
the filter label, and rotate it to the right after
alignment to install the new filter.
3. Installation method of CF
Remove filter
Remove filter
CF
CF
Removal method of CF: Hold the pull ring of CF
with fingers and pull out the filter gently.
Installation method of CF: Insert the
CF inward (the protrusion at the bottom
of the filter is on the left, aiming at the
purifier slot) to ensure it is assembled
in place and the pull ring of the filter is
kept outside.