Unika DSP Series, Инструкция пользователя

Страница: 11 / 14

OPERATING VOLTAGE (AC MAINS) -
On the rear panel will indicate the correct AC mains voltage. Connecting to the wrong voltage is dangerous and
may damage the amplifier. Always be sure the source voltage for your areas matches the required voltage for your amplifier.
GAIN CONTROLS -
The gain controls are located on the front panel and are calibrated in 2dB of attenuation from full gain. It is best to a d j ust the
amplifier so no “hissing” is heard from speakers with no music being played, this will ensure the lowest possible distortion d u ring normal operation.
AMPLIFIER FEATURES:
SOFTWARE CONTROL -
DSP-4000 is designed as a digital power amplifier, it contains digital signal processor (DSP) to control the related functions, such
as EQ, LPF, HPF, Limiter, Delay and digital signal input, via the front panel LCD display, and can be adjusted when connect it to computer with its exclusive
control software.
THRU -
THRU will allow the user to daisy-chain one amplifier’s signal input into another amplifier. Plug the signal source outputs into the first amplifier’s input,
patch from the amplifier’s THRU jacks to the next amplifier’s input, and so on, daisy-chaining as many amplifiers as there is no excessive level loss.
LED INDICATORS -
Each channel has six LEDs. Three green LEDs indicate signal level activity. One red LED indicates signal clipping, one red LED
indicates protection’s mode for short/overload and one white LED indicates the signal is overload and the built-in limiter is activated automatically.
page 10
Introduction Front Panel Rear Panel Set Up Speakon Assembly Operating Modes Specifications
Protection Features
UNiKA DSP-4000