background image

UNiKA DI-BT  

 

 

User Guide

4

 ¼" TRS Link output socket, 

 

  internally parallel wired to the 

 

  input.

 Input: 

 

  XLR-¼" TRS Combo jack, 

 

  unbalanced Hi-Z input used to

 

  connect instruments.  

 Input PAD: 

 

   0dB, -20dB & -40dB selectable 3

 

   steps attenuator reduces the input

 

   sensitivity to prevent overload.

 LEVEL Control: 

 

  Used to set the overall output

 

  level also the headphone output

 

  level changes simultaneously.

 HEADPHONE: 

 

  Mini 3.5mm (1/8

"

) TRS 

 

  headphone output is used to 

 

  check the output from the

 

  Bluetooth audio source for

 

  trouble shooting.

 

  Works with ear-buds and 

 

  standard headphones. 

 USB-B Mini Port: 

 

  Connects from the PC or Mac

 

  using a USB type B-mini cable.

 

  This port delivers only the power

 

  to the DI-BT Box without any

 

  audio data.

 Mono Sum switch: 

 

  When the switch is depressed, 

 

  the left and right channel signal 

 

  will be mixed to form a monaural

 

  signal in both output channels.

 Mono Sum indicator: 

 

  The LED light up show that the

 

  Mono-Sum mode is in use.

 GROUND LIFT: 

 

  Used to help eliminate hum and 

 

  buzz caused by ground loops,

 

  lifts pin-1 on both XLR output

 

  connectors.

 2 CHANNEL OUTPUTS: 

 

  2 channel transformer balanced 

 

  outputs, XLR-3 male connector,

 

  pin layout follows the AES format.

 POWER switch: 

 

 Used to switch the power ON/OFF.

 

POWER ON/OFF LED indicator.

 

Reset switch: 

 

  Turn the RESET switch to the 

 

  ON position and the DI-BT Box 

 

  will be available to pair with

 

  Bluetooth devices.

 

The Red and Blue LEDs will

 

  alternate indicate that the DI-BT

 

  is in search mode for pairing.

Содержание DI-BT













Отзывы: