Unika DI-BT, Руководство пользователя

Страница: 9 / 12

UNiKA DI-BT User Guide
8
a different Bluetooth device for playback, you will need to reset the DI-BT Box.
This is done by turning the RESET switch off and back to on.
The DI-BT Box allows for reception distances of up to 10 meters (33’), which
can be significantly extended under ideal conditions. Should you experience
interference or signal dropouts, ensure that there is a clear line of sight
between the DI-BT Box and your Bluetooth device. You can also adjust the
angle and placement of the DI-BT Box, as this may also affect the reception.
If you’re using a computer with a USB Bluetooth dongle, some
pairing features may not be automatically available.
Please refer to your dongle’s software manual for instructions on
how to activate these features.
Testing and Using
First, set the DI-BT Box’s LEVEL control to the 7 o’clock (off) position. This
will allow you to adjust the output level on the fly.
It’s a good idea to start testing the Bluetooth audio with a sound file you
are familiar with. Set your source’s output level and the level of the media
playback software (if applicable) at 80% or higher for optimal signal to noise.
A higher volume from the source will allow the DI-BT Box to operate at the
lowest noise floor. Keep in mind that various media files will playback at
different volume levels depending on your software and how the sound file
was recorded.
Slowly raise the output level of the DI-BT Box. It is good practice to always
test at a low volume to ensure proper connections have been made and
all devices in the signal chain are set up correctly and working. This way,
should a device not be turned on or a connection not fully made, it will not
create a loud transient ‘pop’ in the PA that could damage a tweeter or annoy
your audience. When satisfied, slowly increase the input gain on your mixing
console until you reach an appropriate level.